On October 23rd, 2023, ETTC and KEU hosted a closing event for the project "Capacity Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers Academy." The event was graced by the presence of notable figures, including Mr. Omed Khoshnaw, Erbil Governor and Ms. Alexandra Guhr, Development Counsellor at the Consulate General of the Federal Republic of Germany in Erbil KRI, and GIZ PSD team members.

A series of impactful speeches were delivered by esteemed individuals, including Dr. Dirk Jankowski, Chairperson of ETTC Board, Dr. Karin Koecher, ETTC Senior Advisor, Mr. Abdulrahman Ali Kurda, Head of KEU, Ms. Svjetlana Djokic, Head of Component of GIZ’s PSD Project, Ms. Baraa Zamo, ETTC Project Coordinator, and two exceptional project beneficiaries.

Throughout the event, attendees were enlightened about the project's achievements and the vital steps needed to ensure the successful establishment of the engineering academy. This academy is dedicated to enhancing the circumstances for engineers in the Kurdistan Region of Iraq. It will focus on crafting diverse scientific programs for engineers, laying the groundwork for a more robust job market within the engineering sector.

A heartfelt thanks to everyone who contributed to the success of this project. Together, we're forging a path towards a brighter future for engineering in the Kurdistan Region of Iraq.

The event is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

As a part of ETTC activities supporting the Department of Non-Governmental Organizations (DNGO), ETTC e.V in Germany has hosted a delegation for the DNGO staff. The delegation's trip started on September 3rd and will conclude on September 9th. The activities are concentrating on two main pillars as follows:

Meeting with the Registration Office for Non-Profit Associations in Germany to understand the procedures and steps involved in registering a non-profit organization, the various types of organizations, eligibility criteria for starting an organization, and the legal framework surrounding non-profits in Germany, in addition to that a meeting with (Goldnetz), a significant non-profit organization located in Berlin, to have an insight into Goldentez's operational procedures, fundraising methods, sources of funding, and their interactions with donors and stakeholders, this experience gave the delegation a detailed overview in terms of the operational procedures of NGOs in Germany.

Additionally, the delegation will participate in meetings and discussions with other entities that play direct and indirect roles in civil society organizations. Furthermore, the training course will cover various essential topics, such as clarifying the mission and responsibilities of NGOs, emphasizing the importance of legality and anti-corruption policies, and promoting financial transparency and accountability.

Particularly the significant role of the Department of Non-Governmental Organizations (DNGO), including its objectives, organizational structure, operational procedures, and collaborative dynamics with the NGOs operating in the Kurdistan Region of Iraq (KRI).
This exchange and exploration aim to enhance the DNGO's knowledge and capacity, enabling them to better support and regulate non-profit organizations within the KRI.

Recognizing the significance of legal personnel within the KRG's directorates and the delicate nature of their responsibilities, ETTC arranged a training program entitled “Capacity Building Training for Legal Staff” aimed at enhancing the expertise of various legal staff members from different directorates within the KRG.

The objective was to elevate their skill set and enhance the precision and caliber of their tasks. The training initiative took place between August 20, 2023, and August 24, 2023, and was delivered by Judge Shwan Mohialdeen Ali.

With the presence of Mr. Hemin Qadir, Erbil Deputy Governor, Bashdar Yassin, the Quality Control Manager in the Erbil Governorate, and Tavga Hussein, Manager of the Legal Department in the Erbil Governorate, the participants received their certificate of participation.

The training course covered the following topics: An overview of the Notary Register Law No. 33 of 1998, Illuminating the amended law of discipline No. 14 of 1991 for the state and public sector employees, Issues arising from the enforcement of the amended Government debt collection law No. 56 of 1977, Enforcing the amended law No. 52 for 1970 of authentication of signatures on Iraqi and foreign documents, and the authenticity of official documents and regular documents.

Recognizing the significance of HVAC-R systems in both residential and public environments for upholding optimal indoor air quality and efficient design, a five-day training course entitled “Heating, Ventilation, and Air Conditioning and Refrigeration (HVAC-R)” was jointly organized by ETTC and KEU on 10/08/2023 for 28 engineers within the Kurdistan Region. Notably, Mechanical Consultant: Asst. Prof. Dr. Ranj Sirwan Abdullah led the delivery of this training course.

With the presence of the honourable guests, Mr. Arez Sadiq, PSD Advisor, Mr. Sirwan Mohammed Mohialdeen, Chairman of the Kurdistan Regional Statistical Board, Dr. Mohammed Tahir, Chairman of the Mechanical Engineering Department at the Salahaddin University, Mr. Halat Rauf, General Manager at Halat Group, Mr. Nasir Ismael Nasir, Design Manager at GEG Company, the participants received their certification of participation.

The training course covered Principle of Air Conditioning Design, Building Survey and Load Estimation, HVAC System Selection, Variable Refrigerant Flow (VRF), HVAC System Classifications, Ventilation and Air Cleaning, Ventilation Principle, Air Conditioning Filters Classes and Particle Size, Fans Definition, Performance, and Efficiency, and Energy Management and Performance.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

Based on all the evidence available, it is evident that occupational accidents and illnesses, along with the resulting economic burdens, have a substantial impact on the proliferation of poverty and hinder the development of any nation. In light of this, ETTC and KEU organized a training course called "Health, Safety, and Environment (HSE)" for a number of engineers in the KRI. The training course took place from 23rd July to 27th July 2023 and was conducted by Advisor Engineer: Kafrean Hasan, a sophisticated engineer in the field of HSE.

The training course covered safety induction, expectation, and emergency, First Aid, Personal Protective Equipment (PPE), hazards at the workplace, waste management, safety reporting, QHSE standards, evacuation procedure, golden safety rules, chemical hazards, field-hydrogen sulfide procedure, safety confined space procedure, fire tringle method, fire classification, procedure of fire prevention, safety industrial ergonomics, and hierarchy of hazard control.

This agreement was a necessity that had been made in the past as a priority for joint work that would benefit the returnees and achieve better results.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On 20th July 2023, in the ETTC-Erbil compound an agreement of cooperation framework has been signed by the European Technology & Training Centre (ETTC) and the Iraqi Ministry of Migration and Displaced (MDM) the aim is to provide further and better services to the returnees within reintegration programs in Iraq.

Mr. Jihad Zero/ CEO of ETTC, and Mr. Ismail Khalil Dahsh Manager of the Organizations and International Cooperation Department at MDM attended the event of exchanging the agreement copies.

This agreement was a necessity that had been made in the past as a priority for joint work that would benefit the returnees and achieve better results.

The following steps will be practical actions towards preparation for finding a new mechanism to shortcut tasks and achieve the objectives that both sides are looking for in the field of returnees and reintegration.

The European Technology and Training Centre (ETTC) provided accommodation for 160 Syrian refugees who fled the war in Sudan from June 24th to June 26th, 2023. By covering the hotel fees, ETTC ensured that the refugees had a safe place to stay without any financial burden. This operation was carried out in collaboration with local authorities in KRI.

From June 11th, 2023 to June 15th, 2023, the esteemed ETTC conducted a highly impactful training course focused on Leadership and Management. The program catered to a select group of dedicated staff members from the Ministry of Planning in the Kurdistan Region of Iraq (KRI).

We were honored to have the distinguished Ms. Shauna Sexsmith as the trainer for this exceptional learning experience. With the presence of Dr. Kanar Hidayat, the Director General of Development Coordination and Cooperation at the Kurdistan Ministry of Planning, the participants received their certificates of participation.

This comprehensive training course encompassed a wide range of vital topics crucial for fostering effective leadership and management skills. Participants delved into various areas, including time management, conflict resolution, effective communication strategies, visionary leadership abilities, the capacity to drive reforms, and future-oriented knowledge and skills essential for successful public administration.

On 11th June 2023, the European Technology and Training Center (ETTC) warmly welcomed the British Deputy Consul General, Ms. Catherine Shaw, at the ETTC compound. The Deputy Consul General expressed her pleasure in visiting ETTC and meeting the staff closely and had the chance to have a tour through our facilities.

During the meeting, ETTC activities and the opportunity to enhance the cooperation and further collaboration between ETTC and British Consulate were the main topics of discussion.

On the 35th anniversary of the Halabja chemical attack. Today 16th March 2023, the European Technology and Training Center (ETTC), dedicated five minutes of silence in the memory of the victims of the 1988 Halabja chemical attacks.

As CSI ETABS designing software has become an indispensable tool for civil engineers in the modern construction world, allowing them to create complex models and simulate real-world conditions before construction even begins. Also, with the help of advanced features and capabilities, CSI ETABS software program assists engineers in ensuring that their structures are safe, resilient, and meet all the necessary building codes and regulations.

Therefore, from 14th February 2023 to 13th March 2023, ETTC and KEU hosted a twelve-day training course entitled "CSI ETABS ’Extended Three-Dimensional Analysis of Building System’” for a number of engineers in the KRI. The training course was delivered by Dr. Bahman Omar Taha. The participants received their certificates of participation with the presence of Mr. Wshyar Qadri, General Director of Project Follow-ups in the Council of Ministers.

The training course covered an introduction to ETABS Software and User Interface, Starting a New Model, Quick Model Templates, Defining Grids, Story Data, Materials, and Sections, Load Patterns, Seismic Loads, and Wind Loads, Drawing Columns, Beams, Concrete Walls, and Slabs, Modelling Five Story R.C Building, Modelling Ten Story R.C Building with Concrete Walls, Modelling Flat Plate R.C Building, Modelling of R.C Footing, Analyses of Design of R.C Foundation, Defining R.C Slab Design Parameters, Analyses and Design of Slabs Using Finite Element and Strip, ASCE7-16 Seismic Parameters, and Wind Load Parameters.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

The loss of around 20 lives in both LPG systems explosions in Slemani and Duhok is a great tragedy, and it is a sad reminder of how important it is to ensure that all LPG systems are installed, maintained, and operated with utmost care and caution.

Therefore, to ensure the current and future LPG systems are maintained and installed by trained engineers, from 06th March 2023 to 13th March 2023, ETTC and KEU hosted a training course entitled "Implementation and Management of LPG Systems in Kurdistan” for a number of engineers from Erbil Governorate and various private sectors in the KRI. The training course was delivered by Dr. Hawre Hussein. With the presence of Mr. Massoud Karash, Deputy Governor and Mr. Nabaz Abdulhamid, Erbil Central Mayor, the participants received their certificate of participation.

The training course covered The Components and Specifications of LPG Systems, Central Gas Systems for the Residential Sector, LPG Cylinders, LPG Systems for Commercial Projects, LPG Systems for Industrial Projects, LPG Systems for Autogas Stations, The Technical Requirements of LPG Systems, Testing and Commissioning LPG Systems, and Management of LPG Systems in Kurdistan.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On March 8th, International Women's Day, The European Technology and Training Center (ETTC) acknowledged the incredible efforts of women who changed the world.

ETTC celebrates and remembers the accomplishments of diligent women who have made significant contributions to society and all aspects of life throughout history and those who continue to do so now.

European Technology and Training Centre (ETTC) and Oxford Cognitive Therapy Centre (OCTC) would like to formally invite applicants to apply for our one-year training programme in Cognitive Behavioural Therapy (CBT).

Those who are interested in applying can attend an online introduction workshop via Zoom that will be held on Monday 6th March at 03:30 p.m. – 05:30 p.m. Iraq time zone. There will be an opportunity to meet senior staff from the Oxford Cognitive Therapy Centre and to find out more about the training.

If you are interested in applying to the CBT online workshop or have any questions, please send your confirmation and questions to: drei7@ettc-iraq.net or 0751 868 7618.

Note: In the attached links, you can find the eligibility criteria, Webinar Zoom link and all the details about the training.

Application details
Webinar Zoom

From the 22nd to the 23rd of February 2023, ETTC conducted a training course on Protocol and Etiquette for a number of staff members from the Court of Appeal, the Judicial Council, and the Office of the Public Prosecutors.

This course covered a variety of topics, from communication techniques to event planning. Participants were taught how to navigate any professional setting comfortably and with confidence. The training will equip the participants with valuable skills and knowledge for their future endeavours. The training course was delivered by Former Swedish Ambassador, Mr. Jan Axel Nordlander.

With the presence of Judge Kawa Fathi Mahsoom, Kurdistan Region Prosecutor General and Judge Khalat Najmaddin Mwfti, Head of Public Relations at the Office of the Public Prosecutors, the participants received their certificates of participation.

The training course covered Etiquette at the Workplace, Etiquette in External Relations with Other Agencies, etiquette for Virtual Meetings, In the Telephones and Digital Communication, Protocol for Organizing Meetings and Conferences, Protocol for Receiving High-Level Guests, and Etiquette for Receptions and Lunches at Restaurants.

On February 22, 2023, ETTC’s board member and Former Swedish Ambassador, Jan Axel Nordlander and representatives from ETTC had a fruitful meeting with The Kurdistan Regional Government’s Minister of Justice.

The meeting was held to strengthen the bonds between the two entities and explore potential areas of collaboration. During the meeting, ETTC’s board member and Former Swedish Ambassador, Jan Axel Nordlander and the representatives met with The KRG's Minister of Justice, Dr. Firsat Ahmed and Judge Abdulrahman Sewayli, General Manager at the KRG's Ministry of Justice.

The officials discussed a range of potential training courses and workshops that could be conducted in the future to enhance the skills and knowledge of the employees at the KRG’s Ministry of Justice.

The meeting was a great opportunity to exchange ideas and explore areas of mutual interest. Both parties expressed their commitment to working together in the future and exploring new opportunities for collaboration. During the meeting, the Minister presented ETTC with a wooden plaque and several paintings as a gesture of their respect.

From the 19th to the 21st of February 2023, ETTC conducted a comprehensive training course on Protocol and Etiquette for 20 staff members from the Kurdistan Ministry of Justice. A variety of topics were covered in this course, from proper communication techniques to formal event planning. The objective was to help participants navigate any professional setting with confidence and ease.

The skills and knowledge they gained during this training will prove valuable to them in their future endeavors. The training course was delivered by Former Swedish Ambassador, Mr. Jan Axel Nordlander.

With the presence of Dr. Krmanj Othman, Legal Advisor of the Minister of Justice in KRI, the participants received their certificates of participation.

The training course covered Etiquette at Your Workplace, Behavior Towards Peers, The Public, and Seniors, Basic Etiquette at Meals, Etiquette for Telephones and Digital Communication, Netiquette for Virtual Meetings, Protocol for Organizing Meetings and Conferences, Etiquette When Communicating Outside Your Office, and Dealing with the Media.

It is estimated that 1,000 people die in workplace accidents every day worldwide. Thousands more die from work-related diseases. According to all available evidence, occupational accidents and diseases, as well as the economic costs they entail, play a significant role in poverty spreading and negatively affecting the development of any country.

Therefore, from 29th January to 02nd February 2023, ETTC and KEU hosted a training course entitled "Health, Safety, and Environment (HSE)" for 26 engineers in the KRI. The training course was delivered by Advisor Engineer: Kafrean Hasan, an expert engineer in the field of HSE.

The training course covered Safety Induction, expectation, and emergency, First Aid, Personal Protective Equipment (PPE), Hazards at the workplace, Waste Management, Safety reporting, QHSE Standards, Evacuation Procedure, Golden Safety Rules, Chemical Hazards, Field-Hydrogen Sulfide procedure, Safety confined space procedure, Fire Tringle Method, Fire Classification, Procedure of fire prevention, Safety Industrial Ergonomics, and Hierarchy of hazard control.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

Due to the fact that AUTODESK REVIT software can significantly impact the overall cost of a project. The time needed to craft a design ready to implement will affect the total project budget. Project managers need to find ways to reduce the likelihood of costly errors in high-stakes projects. This is relevant for anyone working in design, architecture, engineering, construction, and related industries.

Hence, ETTC and KEU conducted another training course for KRI engineers entitled "AUTODESK REVIT" to further develop their skills in the fields of architectural and civil designs developed by the program from 13th Nov. to 14th Dec. 2022, which was delivered by Dr. Aras Jalal. As a result of this training, the graduates of this course are now capable of using the program successfully and are equipped with the skills and competencies necessary for future success in this field.

The honoured guests who attended the certification ceremony were Dr. Ali Rashid, President of Erbil Provincial Council and Mr. Sarwan, Head of the Projects in the Department of Non-Governmental Organization.

The course’s core focus was on Building Information Modelling (BIM), Revit files, floor plans, modifying tools, temporary and permanent dimensions, architectural and structural designs, and many more. The participant had the chance to interact during the course and exchange information with the trainer and other participants and discuss their questions.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union. It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

From 04th December 2022 to 13th December 2022, ETTC and KEU hosted a training course entitled "Solar Photovoltaic Training for Engineers” in the KRI to contribute to the global effort in this field.

The training course was delivered by Ms. Avin Marsum, Ms. Bakhshi Muhammed Tahir, and Mr. Ahmed Al-Eyada, German-certified trainers in the renewable energy/ solar photovoltaic field. The graduated engineers are now able to successfully implement any solar projects successfully to the ultimate quality possible.

The training course covered many topics, namely Designing on-grid/off-grid/hybrid solar systems, System configurations, PV modules, Solar resources, Charge controllers, Inverters DC/AC-coupled, Inverters sizing grid-connected, Lightning and surge protection, cabling, Codes & Standards, HSE in solar projects, Load analysis, batteries overview, battery installation and maintenance, wiring diagrams (off-grid/grid-connected), Site surveys, Testing & commissioning grid-tied/off systems, and Energy consumption monitoring.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

01 December 2022 We are excited to announce a tender opportunity for the provision of vehicle rental services, specifically for vehicles, to support our organization over the next year. We are seeking reliable and experienced vendors to meet our requirements and facilitate our operational needs. Bidders are requested to provide vehicle rental services on a monthly payment basis. Please note that fuel costs, maintenance and periodic vehicle inspections are generally excluded from the rental price. However, in Baghdad they will be included in the rental price.

Scope of Work:
The successful bidder will be responsible for providing high-quality vehicle rental services, specifically focusing on vehicles, for our organization. The details of the services required are as follows:

1. The vehicles will be well-maintained, clean, and in good working condition.
2. Fuel, maintenance and periodic vehicle inspections are not included in the rental price. except for vehicles used in Baghdad.
3. Timely delivery and pick-up of vehicles are essential for smooth operations.
4. The supplier is responsible for setting up the food and beverages in an organized manner during the designated break times.

• Erbil, Duhok and Slemani     4 vehicle
• Baghdad            2 vehicle

Tender Submission: Interested parties are requested to fill out Request for quotation form linked below.
Request for quotation (ETTC A6-2022)

• Tender Announcement Date: 01 December 2022
• Deadline for Tender Submissions: 15 December 2022
• Contract Period: 01 January 2023 to 31 December 2023

Submit by Email: Aram Saadi Sleman, Finance and Administration Office, dfin1@ettc-iraq.net or Submit by Hard Copies: please deliver to ETTC Nawroz Street, Erbil, Iraq Reception Tender Box (ETTC A6-2022)

We look forward to receiving your offers and partnering with a dedicated vehicle rental service provider specializing in vehicles to support our organizational activities. Your contribution will undoubtedly contribute to the overall success of our project.

European Technology and Training Centre (ETTC) conducted a five-day Protocol and Etiquette training course from 27th November to 01st December 2022 for 20 Officials from the Ministry of Justice.

The training course took place in ETTC compound and was delivered by the former Swedish Ambassador Mr. Jan Axel Nordlander. It mainly focused on the topics most crucial for the target group such as etiquette for telephones and digital communication, etiquette for communicating outside of one’s office, for virtual meetings and in a car while driving, etc.

as well as protocol for organizing meetings, conferences and official dinners etc. The honoured guests for the last day, the Certification Ceremony was Ms. Shilan Aref, Agent of the Ministry of Justice, Mr. Krmanj Osman, Advisor in the Ministry of Justice, and Judge Abdolrahman Siwayli, General Manager of the Divan of the Ministry of Justice.

The training course was delivered with the support of group work and practical activities as to pass the most possible knowledge to the participants and the honoured guests encouraged and appreciated the participation of the attendees.

In light of growing concerns about climate change, solar electricity generation has the advantage of being a clean alternative to fossil fuel-based electricity, which does not pollute the air, water, or the environment, does not increase global warming, does not pose any threat to public health, and does not spike electricity prices.

Hence, from 27th November to 01st December 2022, ETTC and KEU hosted a training course entitled "Solar Photovoltaic Sales Training for Engineers” in the KRI.

The training course was delivered by Ms. Sally Hussein and Mr. Ahmed Al-Eyada, German-certified trainers in the renewable energy, solar photovoltaic field. Also, the honoured guests at the Certification Ceremony were Mr. Hussein Hamad, Advisor in the Ministry of Electricity, Mr. Sarhang Khoshnaw, Director of Erbil Electricity Transmission, and Mr. Kamal Assaf, Manager of Erbil Electricity 2.

The training course covered Solar PV value chain and project phases, PV-grid-connected and off-grid systems, Load analysis, Site surveys, Economic evaluation of PV projects, Selling pitching sessions, System inspections, and Pitching sessions for a business idea.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

To ensure that there are enough qualified and trained engineers to manage our traffic on the roads and design a safe and efficient traffic flow for humans, animals, and vehicles on the current and future roads in the region, ETTC and KEU hosted a training course entitled "Transport Planning and Traffic Engineering” for a number of engineers in the KRI from 27th November 2022 to 1st December 2022.

The training course was delivered by Mr. Sirwan Ahmad Musa and Mr. Maksudul Alim, advanced experts working on different traffic systems in Germany.

The training course covered the Basics of Macroscopic Planning, Counting of traffic demands, Traffic safety, Signal control structure and traffic light design, Intelligent transport systems and smart solutions, Basics of microscopic traffic flow simulation, and PTV Vissim Tutorial.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

From 13th November 2022 to 17th November 2022 European Technology and Training Center (ETTC) conducted a 5-day training course entitled #Administrative laws for the 21 employees from directorates and Divan of the Erbil government, delivered by Mr. Judge Gaylani Said Ahmed.

On the last day of the training course, Mr. Hemn Qader (Deputy Governor of Erbil) and Mr. Bazhdar (Quality Control Manager) attended the certification ceremony to congratulate the participants and thanked ETTC for organizing the training courses for their continuous support for the people in KRI by helping public employees in improving their competencies and skills to adapt to the current labor market.

The main topic discussed during the course was proceeding law, criminal procedure code, penal code, the law of administrative decisions, and administrative contracts.

Surveying is one of the most important jobs which must be done before starting a new construction project. The Total Station is the latest instrument nowadays most commonly used by surveyors and civil engineers on job sites.

Therefore, ETTC and KEU hosted a training course for a number of engineers in the KRI entitled "Total Station" from 07th to 10th November 2022. The training course was delivered by a specialized trainer, Mr. Dalshad Ahmed Kareem, and assisted by Mr. Mohammed Ghazi Rasool.

The training course covered many topics, namely introduction to Total Station, capabilities of Total Station, BS Coordinate and Azimuth methods, Setting up Total Station Resection method, Field Application (Surveying), and Field Techniques (point location X Y Z, Reference Element, Area computing, and Stakeout).

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

The water that exists on Earth is a finite resource, and it is essential to every creature's survival, so teaching modern methods of conserving water is crucial to this region's future.

ETTC and KEU hosted a training course for a number of engineers in the KRI entitled "Wastewater Management" from 16th to 20th October 2022. The training course was delivered by a specialized trainer Mr. Felix Leon Bonas.

The training course covered many topics, namely introduction to wastewater management, wastewater discharge, reach rehabilitation, wastewater characteristics, wastewater treatment, water reuse, water reuse regulations, and potable reuse.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, co-funded by the German Federal Ministry for Economic Cooperation and Development with the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

As project managers are responsible for overseeing and managing a variety of activities within a project, including production, operations, quality assurance, and testing.

From 09th to 16th October 2022, ETTC and KEU hosted a four-day training course entitled "Engineering Project Management” for 23 engineers in the KRI. The training course was delivered by a German trainer, Mr. Adrian Strauch.

The training course covered the following topics: Introduction to project, project teams, project goals, stakeholder management, PM triangle, managing delays in projects, Project Structure Plan (PSP), schedule planning, milestones, different scheduling methods, team management, communication and leadership, construction cost management, and risk management.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, co-funded by the German Federal Ministry for Economic Cooperation and Development with the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

From 02nd to 06th October 2022, European Technology and Training Center (ETTC) successfully conducted a 5-day training course entitled “General Contracts” for 19 participants from Erbil Governorate. The course was delivered by Mr. Omer Arab Bilbas.

The course’s core focus was on explaining project tendering processes and the government’s procedure of processing received bids by the private sector and contractors to grant them projects.

The participant had the chance to interact during the course, exchange information with each other, and discuss their questions.

The most crucial requirement for a trainer in today's educational world is to possess the right techniques and methods for teaching a subject. Therefore, from 06th to 08th September 2022, ETTC and KEU hosted a training course entitled "Training of Trainers ToT”for 20 engineers in the KRI.

The training course was delivered by Dr. Karin Köcher, a training and development expert with decades of experience.

The training course covered methods of training needs analysis and assessment of participants’ needs, competencies and qualifications of trainers/co-trainers, what trainers should be aware of, principles of adult learning, steps of implementing a training program, basics of developing and reading curricula, development of lesson plan, ability tests, interactive training methods, evaluation of training quality.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project supported by the Private Sector Development and Employment Promotion project, co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

From 28th August to 01st September 2022 at the European Technology and Training Centre, Erbil (ETTC). A “Leadership and Management” seminar was conducted by Ms. Shauna Lee Sexsmith, a Canadian lecturer, specializing in management and leadership.

The training course had 20 participants, 10 from the Presidency of the Kurdistan Region and 10 from the Commission of Integrity.

The main topics of the training course were understanding leadership from the organizational and individual levels, management strategies, developing, and analyzing preferred leadership and management styles.

The training course was a practical one, the participants were active and had promising discussions with the trainer.

On the fifth day, Mr. Sven Mossler the Deputy German General Consul in Erbil, and the head of the Commission of Integrity, Dr. Ahmed Anwer attended the certification ceremony.

From 17th July to 11th August 2022, European Technology and Training Centre (ETTC) successfully conducted a 20-day training course entitled “Computer Skills” for 14 participants from different directorates of the Ministry of Trade and Industry, delivered by Mr. Nabaz Kamal Othman.

The aim of this training is to have basic knowledge of computer programs (Microsoft Office Word and Excel), to help them by providing basic structured materials that show them skills they can use for their jobs and increase employee productivity in the workplace.

The project is funded and implemented by ETTC.

A training course entitled "AUTODESK REVIT" was held by ETTC and Kurdistan Engineers Union (KEU) from 19th June to 31st July 2022 for 22 participants from Erbil Governorate. The training course was delivered by Eng. Aras Jalal Jalyzada.

The course’s core focus was on Building Information Modelling (BIM), Revit files, floor plans, modify tools, temporary and permanent dimensions, architectural and structural designs, and many more.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On July 24th and 25th 2022, European Technology and Training Centre (ETTC) and Kurdistan Engineering Union (KEU) held a training course entitled “Managing Engineering Offices” for 15 participants who own engineering offices.

The course was delivered by the international trainer Dr. Dirk Jankowski.

The training course’s core focus was on controlling and organization in an engineering office, methods of managing productive hours, organizing profits and costs, personnel management, allocation of human and non-human resources in projects, and managing company finance status. The participants had the chance to interact during the course and exchange information with the trainer and other participants and discuss their questions.

The course is a part of the “Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On the 5th, 6th, and 7th of July, a Three-day “Protocol and Etiquette” Seminar has been successfully organized by the European Technology and Training Centre (ETTC) for 40 participants of senior management and employee from the Commission of Integrity.

Ambassador Mr. Jan Axel Norlander delivered the seminar. The project was successfully carried out by ETTC.Iraq, supported by our supporting partner Konrad Adenauer Stiftung (KAS). With the presence of (Dr. Adnan Abdullah) General Director of Integrity Commission and Director of Academic Integrity (Sawsan M. Adnan).

The aim of the seminar was to provide the participants with an introduction to protocol and etiquette in terms of cross-cultural communications, considering the terms in official meetings, conferences, individual etiquette at meals, Receiving guests from abroad, and Dress codes etiquettes

On the 3rd and 4th of July, a two-day “Protocol, and Etiquette” Seminar has been successfully organized by the European Technology and Training Centre (ETTC) for a 14-target group from the Kurdistan Regional Presidency and the seminar was delivered by Ambassador Mr. Jan Axel Norlander.

The project was successfully carried out by ETTC.Iraq, supported by our supporting partner Konrad Adenauer Stiftung (KAS). and with the presence of German General Consul Mr. Klemens Semtner.

The aim of the seminar was to provide the participants with the ability to learn the terms of protocol and etiquette in modern times and international relations, and in cross-cultural communications. And protocols in the official meetings and conferences.

European Technology and Training Center (ETTC) sponsored the (Soran Lanka Shorsh) Project which is initiated by DNGO with the Soran independent administration collaboration and NGOs in Kurdistan.

The purpose of this project is to encourage NGOs and INGOs to implement some of the projects in the Soran Independent Administration district.

Having such a collaboration for Implementing some projects in this area will increase job opportunities, enhance economic aspects with the support of government institutions and develop the tourism sector.

On July 2, 2022, (ETTC) had the pleasure of hosting a certification event for a three-day seminar on "Rights of the Judiciary in Kurdistan" that was given to a target audience of 20 general prosecutors and judges of the KRI.

The project was successfully carried out by ETTC, supported by our supporting partner Konrad Adenauer Stiftung (KAS), and presented by Goran Lambertz, a former chancellor of justice and Supreme Court justice of Sweden.

International crimes served as the seminar's main focus, and the instructor brought up a number of cases for discussion and an exchange of views between the west and Kurdistan regarding the law and appropriate judicial sanctions.

The German General Consul Mr. Klemens Semtner was the honoree on this occasion, and the president of the Appellate Court of Erbil Mr. Fakhir Saber, and Mr. Kawa Fathi the President of the General Prosecutors of KRI.

On 23rd June, the European Technology and Training Center (ETTC) organized a certification ceremony for 14 legal employees from different KRG provinces in the Ministry of Labour and Social Affairs which has participated in five days of training entitled “Strengthening the capacity of the legal staff of MoLSA”.

It was delivered by Mr. Nazmi Mousa & Mr. Goran Othman.

The course was designed to provide the participants with strengthening legal aspects within the ministry of Social Affairs in terms of Iraqi labor laws, social insurance, work discipline, precaution and injuries in the workplace…etc.

The guests of honor in this event were the Deputy Ministry of Labor and Social Affairs of the KRG (Mrs. Zakiya Saed Salih), and the Director-General of the Ministry of Labor and Social Affairs (Dr. Arif Hito) who congratulated the participants and thanked ETTC for organizing the training courses and their continuous support for the people in KRI.

On 20th June 2022, the European Technology and Training Center (ETTC) held a training session course entitled “Stress Management” for its staff members and it was delivered by Mr. Zana Nawzad.

The training session was designed to help participants cope and manage their stress in their daily lives and work environments.

During the training, several activities and tips were provided by the trainer to the attendees in order to assist them in managing their stresses as efficiently as possible.

From 05th to 09th June 2022, European Technology and Training Centre (ETTC) and Kurdistan Engineering Union (KEU) held a training course entitled “General Contracts” for 24 participants from Erbil Governorate.

The course was delivered by the trainer, Eng. Dana Aziz Hameed. With the participation of representatives from GIZ, ETTC, KEU, Iraqi Engineers Union, and Erbil Governorate, the participants received their certificate of participation, and after the event, the representatives of the entities mentioned above had a meeting and discussed the importance and future steps of the project.

The course’s core focus was on explaining project tendering processes and government’s procedure of processing received tender offers and proposals by private sectors and contractors to grant them projects. The participants had the chance to interact during the course and exchange information with the trainer and other participants and discuss their questions.

The course is a part of the "Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On the 5th and 6th, a two-day “body language” Seminar has been successfully held by the European Technology and Training Centre (ETTC) for the Kurdistan Regional Presidency and the seminar was delivered by Dr. Fadil Jaf.

The aim of the seminar was to provide the participants with a clear understanding of how your personal style influences your body language and how to activate your body language as an important tool in management and leadership.

The role of body language in the workplace and in communication.

On 17.05.2022, the European Technology and Training Centre (ETTC) successfully held a three-day workshop on “Constitution for the Kurdistan Region” for Kurdistan Parliament by attending more than 50 participants who were Parliament members and Advisors.

It has been facilitated by Prof. Dr. Eva Maria Belser, the expert in comparative constitutional law and Co-Director of the Institute of Federalism at the University of Fribourg, Switzerland.

The aim of the workshop was to provide participants with an in-depth introduction to constitutions and constitutionalism, specifically focusing on a potential constitution for the Kurdistan Region.

Through interactive sessions and working groups, the participants are encouraged to think about and discuss a future constitution for Kurdistan.

The project is funded by KAS and implemented by ETTC incorporation with Parliament Research Center.

On May 8th and 10th 2022, European Technology and Training Center (ETTC) and Kurdistan Engineering Union (KEU) held the first part of a training course entitled “Managing Engineering Offices” for 18 participants who own an engineering office.

The course was delivered by international trainers, Dr. Karin Köcher and Dr. Dirk Jankowski.

The course’s core focus was on market conditions, office management, managing personnel, and finance management, which was customized for engineering offices.

The participant had the chance to interact during the course and exchange information with the trainers and other participants and discuss their questions.

The course is a part of the “Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

It is implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

On May 9th 2022, European Technology and Training Center (ETTC) and Kurdistan Engineers Union (KEU) held a launching conference to announce the “Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy” project which is supported by the Private Sector Development and Employment Promotion project, which is co-funded by the German Federal Ministry for Economic Cooperation and Development and the European Union.

implemented by Deutsche Gesellschaft für internationale Zusammenarbeit (GIZ) GmbH in cooperation with ETTC and KEU.

The guests of honor in this event were the representative of KRG, the representative of Erbil Governorate and German Consulate.

The project aims to establish a further education academy for engineers, improve employability for young engineers, and the opportunity for all to act competitively in the construction market, and to contribute to the development of the regional infrastructure.

24 April 2022 We are pleased to announce a tender opportunity for the provision of catering services for lunch and coffee breaks during our training sessions over the course of the next year. We are seeking reliable and experienced vendors to fulfill our requirements and enhance the training experience for our participants.

Scope of Work:
The successful bidder will be responsible for providing high-quality lunch and coffee break services for our training sessions. The details of the services required are as follows:

Lunch Per Person: Rice, Vegetable Biryani with Brown Rice, Mixed Burak and Kofta , Roasted Chicken, Meat and Fish Options, Soup , Taboula, Hummus , Potato Wedges , Beets with Pomegranate, Soft Drinks.

Coffee Break Per Person: Tea, Coffee , Assorted Soft Drinks , Different Types of Cakes and Biscuits , Custard , Selection of Fresh Fruits.

Number of Courses and Participants: The training sessions will approximately be a round 15 to 17 courses each 3-5 days, with each course providing catering to 20 to 28 participants.

General Requirements:

1. The meals must be prepared using high-quality ingredients, ensuring a balanced and nutritious offering.
2. All food items should be freshly prepared and delivered on time for each training session.
3. Packaging and presentation should be professional and hygienic.
4. The supplier is responsible for setting up the food and beverages in an organized manner during the designated break times.

Tender Submission: Interested parties are requested to submit their Offer.

• Tender Announcement Date: 24 April 2022
• Deadline for Tender Submissions: 01 May 2022
• Contract Period: 01 May 2022 to 31 August 2023

Submit by Email: Aram Saadi Sleman, Finance and Administration Office, dfin1@ettc-iraq.net or submit by Hard Copies: please deliver to ETTC Nawroz Street, Erbil, Iraq Reception Tender Box (ETTC 2022-07)

We look forward to receiving your offers and partnering with a dedicated catering service provider to enhance our training sessions. Your contribution will undoubtedly contribute to the overall success of our Project.
Sincerely,

Dear Potential Suppliers, We are pleased to announce a tender opportunity for Capacity-Building Measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy. We are seeking reliable and experienced contractor to fulfill our requirements and enhance the training experience for our participants.

Scope of Work:
The successful bidder will be responsible for providing a capacity-building measures with the Kurdistan Engineers Union and Establishment of an Engineers’ Academy. The contractor has the following major tasks:

• Provision of an expert for developing for organizational development / feasibility study about personal and organizational needs of the chamber and the training needs for engineers.
• Provision of an expert to carry out a needs assessment for the academy and provide a report in this regard for the purpose of creating a further education academy for engineers which improves employability for engineers.
• Developing professional curricula for 4 engineering topics according to modern standards.
• Provision of international trainers to deliver training courses in various engineering topics, each training should be 5 days, however, some of the training courses can be for 3 days. For each of the trainers, the selection should be based on experiences with the subject and a written CV.

Deliverables:

• With regard to capacity building measures: Report on the capacity assessment of the Kurdistan engineers Union’s development and report on the needs assessment of the Engineers.
• With regard to the academy development: Development of an organizational structure for the academy in cooperation with KEU, designing important documents for implementing training development and general needs for a qualification academy; first implementation steps based on an agreement with the KEU and concept for sustainable future development of the academy
• Engineering curriculum development for 4 curricula.
• Capacity development training and transformation of the knowledge to the engineers through 8 training courses each with approximability 20 participants. Topics for the Training courses will be provided according to the needs assessment asap.

Tender Submission:Interested parties are requested to submit their offers (ToR) by filling out the ToR file linked below.
ToR Document ETTC 2022-13

Tender Timeline:

• Tender Announcement Date: 01 April 2022
• Deadline for Tender Submissions: 06 April 2022
• Contract Period: April 2022 to August 2023

Submit by Email: Aram Saadi Sleman, Finance and Administration Office, dfin1@ettc-iraq.net or submit by Hard Copies: please deliver to ETTC Nawroz Street, Erbil, Iraq Reception Tender Box (ETTC 2022-13)

We look forward to receiving your offers and partnering with a dedicated service provider to enhance our training sessions. Your contribution will undoubtedly contribute to the overall success of our Project.

On the 34th anniversary of the Halabja chemical attack. Today 16th March 2022, the European Technology and Training Center (ETTC), dedicated five minutes of silence in the memory of the victims of the 1988 Halabja chemical attacks.

The European Technology and Training Centre (ETTC) celebrates the national Kurdish Clothing Day by wearing traditional Kurdish outfits calling back the beautiful history of our Kurdish customary clothes.

ETTC wishes every Kurd around the world a happy Kurdish Clothing Day!

On the 10th of March, (ETTC) had the pleasure to hold one day a Protocol and Etiquette Seminar that was conducted for 20 participants from Erbil Governorate, the participants were mayors and managers of different districts and sub-districts of Erbil.

The project had been successfully implemented by ETTC and funded by our supporting partner Konrad Adenauer Stiftung (KAS).

The guests of honor in this event were the Deputy of Erbil Governor Mr. Hemin Qadir and the Deputy Consul General of Germany in Erbil Mr. Sven Mossler who congratulated the participants and thanked ETTC for organizing the training courses and their continuous support for the people in KRI by helping public employees in improving their competencies and skills to adapt to the current labor market.

The seminar has been delivered successfully for one day by Dr. Gunter Mulack. And the subjects that were covered during the seminar are protocol and etiquette in modern times and international relations, the importance of protocol in official and private contacts, and the advantages of mastering the basic rules of etiquette and protocol, etc.

On March 8th, International Women's Day, The European Technology and Training Center (ETTC) acknowledged the incredible efforts of women throughout the world.

ETTC celebrates and remembers the accomplishments of diligent women who have made significant contributions in society and all the aspects of life throughout history, as well as those who continue to do so now.

On the 7th of March, the European Technology and Training Centre (ETTC) had glad to hold a Protocol and Etiquette Seminar that was conducted for Political Parties at the ETTC.

16 participants from 7 different political parties of the KRI have participated in a Protocol and Etiquette seminar certification ceremony.

The seminar was delivered by Dr. Gunter Mulack and successfully continued for two days.

The participants were able to learn the terms in protocol and etiquette in modern times and international relations, the importance of protocol in official and private contacts, etc.

On the 1st of March, the European Technology and Training Centre (ETTC) had the pleasure to hold a certification ceremony for 36 staff members from Kurdistan Institute for Public Administration (KIPA) and different KRI directorates who participated in a body language seminar.

The seminar was delivered by Dr. Fadil Jaf and successfully continued for two days.

The participants were able to learn body language technics with the definition of body language concepts and body language interpretation and communication so much more.

This project has been funded by ETTC In collaboration with KIPA.

Today, on the 17th February 2022, the European Technology and Training Centre (ETTC) had the honor to hold a certification ceremony for 24 political party leaders in KRI who participated in an HR Management and Performance Development training conducted by the international trainer, Dr. Karin Koecher.

The participants were able to learn the goals and functions of Human Resource Development, how to hire the right people, important HR development tools, and much more. The overall goal of this project is to support governance capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

The guest of honor on this occasion was H.E. German General Consul Klemens Semtner who congratulated the participants for this achievement and wished them success in implementing the knowledge they’ve gained from the training.

The project had been successfully implemented by ETTC and funded by our supporting partner Konrad Adenauer Stiftung (KAS)

On the 8th February, the European Technology and Training Centre (ETTC) had the pleasure to hold a certification ceremony for 21 staff members of the Research Centre, Media, and Library department of the Parliament in KRI who participated in an Information Management Workshop.The workshop was delivered by Dr. Karin Koecher and successfully continued for two days.

The participants were able to learn the basics and importance of information management, information requirements of Parliament Members, analysis of documented materials and so much more.

This project has been funded by our continuous supporting partner Konrad Adenauer Stiftung (KAS).

On the 20th December 2021, European Technology and Training Centre (ETTC) contributed 500 blankets to the affected families of the recent flood crisis in some neighborhoods in Erbil governorate, the blankets were received by the Department of Non-Governmental Organization (DNGO).

Today, 16th December 2021, the European Technology and Training Centre (ETTC) had the pleasure to hold a certification ceremony for 22 political party members in KRI for their successful participation in the Political Innovation workshop.

ETTC provided a five-day intensive workshop for active party members in the KRI, covering a variety of significant political topics. The participants were able to learn and discuss how to adapt and direct and the role of innovation on political parties, among many other important subjects.

The overall objective of this project is to support the political parties and their members and strengthen the collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

On the 15th December 2021, the European Technology and Training Centre (ETTC) had the honor to hold another certification ceremony for 27 participants who successfully participated in an Advising workshop.

Among the participants where Parliaments Advisors and Researchers who were able to learn and discuss what Parliamentary Researchers do and how they can make a comparative progress in parliamentary democracy. The overall objective of this project is to support the parliament capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

The guests of honor on this occasion were the Deputy Consul General of Germany, Mr. Sven Mossler , and Parliament Divan President, Mr. Ardalan Mohammad who warmly congratulated the participants for their achievement and expressed their support and gratitude for ETTC’s contribution to the Kurdistan Parliament development.

Thursday, 2nd December 2021, the European Technology and Training Centre (ETTC) had the pleasure to hold another certification ceremony for 19 Mayors and General Directors in KRG who participated in a Management and Leadership Training.

The participants were able to learn how to be an effective leader and adopt strategic management skills that will contribute to the development of their daily work and decision making.

Mr. Bashdar Yassin, the Quality Insurance Manager in the Erbil Governorate congratulated the participants and thanked ETTC for their contribution in the development of the country.

Thursday, 25th of November, the European Technology and Training Centre (ETTC) held another certification ceremony for 20 participants attending a comprehensive 5-days training.

Among the attendants were Mayors and General Directors in KRG who participated leadership and management training and were able expand their knowledge on communication and collaborative strategies.

The guest of honor in this event was Mr. Bashdar Yassin, the Quality Insurance Manager in the Erbil Governorate who congratulated the participants and thanked ETTC for their contribution in the development of the country.

November 13^th marked the World Kindness Day, and the European Technology and Training Centre (ETTC) had the pleasure to join the 41st anniversary of the Runaki Blind Institute Erbil.

ETTC has always been interested in supporting disadvantaged people among them also the visually impaired people because we believe that they play a big role in the improvement and development of the society.

In cooperation with EJCC, ETTC donated a number of needed items for the institute that would allow them to continue to operate.

On the 23th of October 2021, the European Technology and Training Centre (ETTC) had the pleasure to sponsor an author’s event in Erbil’s Culture Hall to continue in supporting and strengthening the cultural and educational activities in KRI.

ETTC’s contribution for this cause was to fund a total of 7,500 copies of 15 different books in cooperation with Mali Ktib for 15 of the most seasoned authors in KRI.

As a give-away, a large number of the copies have been given to the audience for free.

The panel was held in Halabja to bring together representatives of NGOs and discuss ways to upgrade their partnership with the international NGOs.

This event was sponsored by the European Technology and Training Centre (ETTC) and organized by the Department of NGO to give the local NGOs the opportunity to introduce themselves and address their concerns to the international NGOs. The DNGO panel also gave the local NGOs the chance to seek approaches to strengthen their bond between the NGOs in Halabja for achieving better outcomes and results in their projects.

Among other activities of the different NGOs participating in the panel, the ETTC distributed 21 big sized trash bins for the touristic sides in Halabja including Awesar, Ahmed Awa, and Biyara to preserve the environment and keep the beautiful nature of Halabja.

The European Technology and Training Centre (ETTC) had organized a certification ceremony for sixteen engineers of the Erbil Governorate who successfully participated in a sixteen days’ workshop of the Autodesk Revit Program which was conducted by Dr. Aras Jalal.

participants were able to gain skills and obtain knowledge to take a project from start to finish using the tools and library provided by the Autodesk Revit Program.

The European Technology and Training Centre (ETTC) had the pleasure to thank the German Acting Consul General, Mr. Sven Krauspe, and express our gratitude for his great support throughout the last two years to ETTC and KRI.

We wish him good luck and success in his future achievements.

The European Technology and Training Centre (ETTC) acknowledges the power of education on the society and continuously seeks ways to upgrade the education system for a better tomorrow.

With delight, we held a certification ceremony for 21 employees of the Federal Ministry of Education/Baghdad, Erbil Representative who participated in the Leadership and Management in Education workshop for five days in ETTC.

The participants were able to learn about the leadership and management skills and to manage oneself to lead others more effectively.

On the 26.06.2021, the Erbil Governor, Umed Khoshnaw extended his gratitude for the high cooperative performance of charity activities carried out in the holy month of Ramadan by the European Technology and Training Centre (ETTC) and other organizations and companies.

The Governor of Erbil wished the attendees in the appreciation ceremony success and hoped for more charity activities in the future.

The European Technology and Training Centre (ETTC) strongly believes that children are the hope for a better future and therefore, we as the ETTC team were more than happy to contribute on behalf of the Aid Pioneers where 600 stationary packages had been distributed among the pupils of the Babagurgur Primary School in Erbil.

Aid Pioneers is a German NGO based in Berlin who is led by young, ambitious adults who put all their expertise and best efforts to create a fully functioning logistics network for effective and immediate relief in disaster regions.

They always try to put the wellbeing of kids first and their chance to live a life fit for children. Present in this donation event were the German Consul for Economic Cooperation and Development, Daniel McCormack, the Deputy Governor of Erbil, Hemn Qader, General Director of Erbil Eduction, Bazhdar Khoshnaw.

We would like to thank Qatar Airways and their WeQare program who enabled the transportation free of costs. We also like to thank Rieck Logistics as well as CL Spedition who supported Aid Pioneers in Berlin and thanks for IDEN group who provided the stationaries, Erbil Governor, EJCC, Erbil General Education and the German Consulate for their continuous support. Great Thanks to Aid Pioneers.

To improve the transparency in KRG, the European Technology and Training Centre (ETTC) acknowledged the need to hold a workshop for the Head of Committee and Advisors in the Parliament of KRI.

The workshop had been conducted by professional international and local trainers. This project aimed to expand their capacity to discuss budgeting from Government to the Parliament and to develop their report writing skills.

The European Technology and Training Centre (ETTC) has supported many art project activities throughout the years. On 08th June 2021, the second Kindergarten Art activity has been completed in cooperation with a German Graffiti Designer, fresh graduates of Erbil Art Institute, and EJCC bringing joyful colors into the Mrwari Kindergarten in Erbil.

Today, the European Technology and Training Centre (ETTC) has organized a certification ceremony for the Mayors, and General Directors in KRI who took part in a Protocol, Etiquette and Body Language workshop which was conducted by Ambassador, Jan Axel Nordlander and Dr. Fazil Jaff.

The workshop covered rules and customs to express and convey information that would generate subsequently decent and professional communication.

The guests of honor of this event were His Excellency Governor of Erbil, Mr. Omed Khoshnaw, His Excellency German Consul General, Mr. Klemens Semtner, Deputy Governor, Mr. Hemin Qadir and Head of Department of Non-Governmental Organization (DNGO), Mr. Barzan Akram who congratulated the participants for this achievement and expressed their support and gratitude for ETTC’s contribution to the KRG’s development..

This project was funded by ETTC’s continuous supporting partner, Konrad Adenauer Stiftung (KAS).

On the 13.03.2021, the European Technology and Training Centre (ETTC) held a certification ceremony for another group of political party leaders in KRI for their successful participation in a leadership training program. Human Resources Management and Performance Development were two of the key subjects covered in this workshop.

The participants were able to learn and discuss about the functions of HR development and improvement performance among many other important subjects. The overall objective of this project is to support governance capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

This project has been funded by our continuous supporting partner Konrad Adenauer Stiftung (KAS).

The European Technology and Training Centre (ETTC) celebrates the national Kurdish Clothing Day by wearing traditional Kurdish outfits calling back the beautiful history of our Kurdish customary clothes.

ETTC wishes every Kurd around the world a happy Kurdish Clothing Day!

The European Technology and Training Centre (ETTC) team had the honor to visit the new head (Mr. Barzan Akram) of the Department of Non-Governmental Organization, to introduce ETTC and its staff.

Mr. Barzan acknowledged the contributions of ETTC to the country’s development and wished the team success for its upcoming projects and programs.

On the 06.03.2021, the European Technology and Training Centre (ETTC) held a certification ceremony for political party leaders in KRI for their successful participation in a leadership training program. ETTC has worked to improve public administration governance since its inception, but in these difficult times, it is particularly important to press party leaders to enact reforms.

Hence, International lecturers conducted a five-day intensive workshop for active party leaders in the KRI, covering a variety of significant leadership topics. Human Resources Management and Performance Development were two of the key subjects covered in this workshop.

The participants were able to learn and discuss about the functions of HR development and improvement performance among many other important subjects. The overall objective of this project is to support governance capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

This project has been funded by our continuous supporting partner Konrad Adenauer Stiftung (KAS).

Today, on the international women’s day, the European Technology and Training Centre (ETTC) celebrates the marvelous efforts by women all over the world.

ETTC honors and recalls the achievements of hardworking women who have played extraordinary role in history, and those who continue to contribute to the society, economy and other areas of life.

On the 28.01.2021, the European Technology and Training Centre (ETTC) held a certification ceremony for different political party leaders in KRI for their successful participation in a leadership training program.

Since its very beginning ETTC has contributed in improving the governance in public administration but at such challenging times, it is considered especially necessary to push the party leaders to implement reforms.

Therefore, an intensive five days’ workshop had been delivered by international lecturers for active party leaders in the KRI to cover various important leadership topics.

Two of the main topics discussed in this workshop were Human Resources Development and Social media. The overall objective of this project is to support governance capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

This project has been funded by our continuous supporting partner Konrad Adenauer Stiftung (KAS).

On the 17th of December 2020, the European Technology and Training Centre (ETTC) and KR-UK IMPAKT held a certification ceremony for the school's social workers successful participation in a mental health training where participants could learn various affective skills to improve their capacity and further contribute to the development of the community.

The guests of honor in this event were His Excellency Consul General Mr. Rob Waller, His Excellency Minister of Education Mr. Alan Hama Saeed Salih, Ms. Kathrin Jaschke, head of the economic section German General Consulate, Director General in Ministry of Education Mr. Bazhdar and head of planning in the ministry of education Mr. Hassan who all congratulated the participants and wished them success in the implementation of what they have learned from the training.

This project was executed successfully in cooperation of ETTC and KR-UK IMPAKT.

On the 10.12.2020, the European Technology and Training Centre (ETTC) held a certification ceremony for different political party leaders in KRI for their successful participation in a leadership training program.

Since its very beginning ETTC has contributed in improving the governance in public administration but at such challenging times, it is considered especially necessary to push the party leaders to implement reforms.

Therefore, an intensive five days’ workshop had been delivered by international lecturers for active party leaders in the KRI to cover various important leadership topics.

The overall objective of this project is to support governance capacity and collaboration among political parties in the KRI during the country’s transition to growing stability and democracy.

This project has been funded by our continuous supporting partner Konrad Adenauer Stiftung (KAS).

On the 2nd of December 2020, the European Technology and Training Centre (ETTC) held a certification ceremony for fifteen labor inspectors of MoLSA coming from different directorates and cities of the KRI who had participated in a training to improve their skills and refresh their knowledge on the field of labor law

The guests of honor in this events were the Deputy Ministry of Labor and Social Affairs in the KRG (Mrs. Zakiya Saed Salih), General Director at the Ministry of Labor and Social Affairs (Dr. Arif Hito), and General Director at MoLSA in Baghdad who congratulated the participants and thanked ETTC for organizing the training courses and their continuous support for the people in KRI by improving their competencies and skills to adapt to the current labor market.

This project had been funded and implemented by the European Technology and Training Centre.

In the framing of the project Qudra2- Resilience for refugees, IDPs and host communities in response to the protracted Syrian and Iraqi crises. European Technology and Training Centre (ETTC) in cooperation with Hungarian Interchurch Aid (HIA), will announce 10 small grants for developing exist businesses, five grants in Erbil and five grants in Dohuk governorates, the average grant is between 6000 to 10,000 USD.

The applicant should have the following conditions (Criteria) as a first level.

• The business license must be available from the government side.
• Age of the applicant between (18 – 35)
• Business must be established and have been running for at least 2 years
• Intention and ability to hire 2 additional employees that are registered in the directorate of labor in Erbil or Duhok
• Acknowledgment from notary and having surety.
• The employer must not be a public employee.

First you have to apply through THIS platform, and after the initial selection, during the second round, you will be requested to submit following documents:

• Detailed description of the business plan
• Brief history of the enterprise
• CV of the owner/manager
• CV of the owner/manager
• CV of the owner/manager
• Previous financial reports
• Detailed request for items, equipment, renovation, extension and/or rental of premises, salary subsidies (in case of job placement), other direct non-financial beneficiary support;
• Training needs (training of 1 person is budgeted).

Deadline 01.12.2020
Please click on the link below to apply for grant:

On the 12th of November 2020, the European Technology and Training Centre (ETTC) joined an author’s event in Duhok city to support and strengthen the cultural activities in KRI.

ETTC’s contribution for this cause was to fund a total of 3, 000 copies of 6 different books in cooperation with Dohuk Writer’s Syndicate for two of the most seasoned authors in Duhok.

The authors in this event, Dr. Arif Hito and Dr. Fadhel Omer summarized their books and discussed what inspired the books, and what happened along the way to publication.

As a give-away, a large number of the copies have been given to the audience for free. To follow the COVID-19 health and safety regulation of Dohuk governorate, only a limited number of people could be invited.

On the 28th of October 2020, the European Technology and Training Centre (ETTC) held the second certification ceremony for another group of instructors in Ministry of Labor and Social affairs (MoLSA) coming from different directorates and cities of the KRI.

The purpose of the training was to refresh and improve the skills of the instructors to further help job seekers and business startups.

The guests of honor in this event were Her Excellency Minister of Labor and Social Affairs (Mrs. Kwestan Mohamad) Acting German Consul General in Erbil (Mr. Sven Krauspe), and Director General of MoLSA (Dr. Arif Hito) who all congratulated the participants and thanked ETTC for organizing the training courses and their support for the people in KRI by improving their competencies and skills to adapt to the current labor market.

At the end, the guests of honor also thanked the German government and KAS for their continuous financial support.

This project has been funded by Konrad Adenauer Stiftung (KAS) and implemented in cooperation with the European Technology and Training Centre (ETTC) and the Ministry of Labor and Social Affairs (MoLSA).

As the government relaxed the restrictions, identified cases of the novel corona virus are increasing day by day in Iraq and Baghdad has been reported to be the worst hit city.

For this reason, the European Technology and Training Centre (ETTC) saw the need of distributing medical protective supplies among the health care workers in the Medical city / Private Nursing Home Hospital of Baghdad to avoid shortage and supporting the patients and people visiting the hospital to continue in taking the precautionary measures.

8000 masks and 96 hygiene bottles of 750 ml had been handed over the NH private Hospital and distributed among the health care workers.

On the 15th of October 2020 the European Technology and Training Centre held a certification ceremony for eighteen instructors of MOLSA coming from different directorates and cities of the KRI who had participated in a training to refresh and improve their skills

The guests of honor in this events were Acting German Consulate (Mr. Sven Krauspe), Deputy Ministry of Labor and Social Affairs in the KRG (Mrs. Zakiya Saed Salih), and Director General of the Ministry of Labor and Social Affairs (Dr. Arif Hito) who congratulated the participants and thanked ETTC for organizing the training courses and their continuous support for the people in KRI by improving their competencies and skills to adapt to the current labor market.

This project had been funded by Konrad Adenauer Stiftung (KAS) and implemented in cooperation with the European Technology and Training Center (ETTC) and the Ministry of Labor and Social Affairs (MoLSA)

The next training will commence on 25th October for another Eighteen instructors for the same topics.

ETTC is looking for suitable candidate for the following position:
Title: Reintegration Counselor
Duty Station: Duhok
Deadline for applications: 15th October 2020
Working Days: 5 Days/Week (40 Hours/Week)
Duties and Responsibilities
The Reintegration Counselor will be responsible for:
• Interview with the returnees.
• Filling the forms for returnees.
• Translation documents.
• Implementation.
• Review the documents.
• Finalization cases.
• Required qualifications, competencies and experience Qualifications
• Professional experience
• Education: Bachelor’s degree of business administration and English language or related degrees
• Experience: minimum one year in relevant field
• Language Skills: English, Kurdish and Arabic is a must.
• Computer Skills: Word, Excel and email communication.
How to apply:
• Interested candidates can send their updated CV (in English/ PDF) to: dohukcv@ettc-iraq.net

As the number of COVID-19 cases is increasing, the European Technology and Training Centre (ETTC) acknowledged the necessity to supply the Ministry of Labor and Social Affairs of KRG with awareness booklets showing reliable guidelines and precautions to stay healthy and protect ourselves from exposure.

35000 booklets will be distributed by the Ministry of Labor and Social Affairs among different public service units which will strengthen the alertness, knowledge, and competencies of children and adults in time of COVID-19. For reaching civilians of different backgrounds, the booklets were translated into English, Kurdish (Baadini and Sorani dialects), and Arabic language.

Herewith we would like to extend our appreciation for the good cooperation with our partner Konrad Adenauer Stiftung (KAS) who funded this project.

#StayHome #StaySafe

On the 9th of June, Her Excellency the Minister of Labor and Social Affairs (MoLSA), Mrs. Kwestan Mohamad and the Director General, Dr. Arif Hito were honored guests of the European Technology and Training Center (ETTC).

staff members spent the day discussing ETTC’s contribution to the labor market in KRI and Iraq. The esteemed Minister acknowledged and expressed her kind gratitude for the accomplishments done throughout the years and wished ETTC more success in the years to come.

Today on 06.04.2020 ETTC made an eagerly needed contribution to Duhok Governorate, distributing various types of protective supplies including medical grade masks, latex gloves and hand sanitizer gel.

The supplies were distributed amongst the civil security departments, police departments, quarantine centers and service offices such as (guards, electricity offices, water and sewerage office as well as multiple municipality offices) who continue to work and are on duty during the public curfew/lockdown in the city of Duhok.

Hand sanitizer gels 280
Hand sanitizer alcohol 292
Filtered masks 300
Gloves 1800

#StayHome #StaySafe